Restore Your Redmi Note 5 Pro with MIUI 9.5.19: A Step-by-Step Guide

If you are experiencing audio issues after updating to MIUI 9.6.2.0, reverting to the previous version, MIUI 9.5.19, might resolve the problem. This guide will walk you through flashing the previous version of MIUI using the fastboot method, ensuring a smooth and safe process. Please follow these steps carefully to avoid bricking your device.

Step 1: Download the Correct MIUI Version

The correct version to download for your Redmi Note 5 Pro is MIUI 9.5.19. This is the latest stable version from which you can downgrade safely. You can find the download link on the MI Community App or on YouTube.

Step 2: Prepare Your Device and Computer

Before you begin, make sure both your Redmi Note 5 Pro and your computer meet the following requirements:

Redmi Note 5 Pro: Maintain the stock MIUI version (9.5.19 or later).Computer: Ensure that you have the correct ADB and fastboot tools installed along with the necessary USB drivers for your device.

Step 3: Charge Your Device

Ensure that your Redmi Note 5 Pro is fully charged. It’s recommended to have at least 50% battery to avoid unexpected shutdowns during the process.

Step 4: Enter Fastboot Mode

Place the Redmi Note 5 Pro in fastboot mode by following these steps:

Power off your the device to your computer using a USB and hold the Volume Down and Power buttons simultaneously for approximately 7 to 8 seconds. The screen should turn off, and the device should enter fastboot mode.

Step 5: Boot into Fastboot Mode

Once your device is in fastboot mode, use the following commands in your terminal to boot into fastboot:

fastboot devicesfastboot oem unlockfastboot reboot-fastboot

Step 6: Flash the MIUI 9.5.19 Images

After rebooting into fastboot mode, use the following commands to flash the MIUI 9.5.19 images:

fastboot flash logo fastboot flash recovery fastboot flash boot fastboot flash system fastboot flash vendor fastboot flash modem fastboot erase cachefastboot erase dtbofastboot oem lockfastboot reboot

Replace the filenames (, , etc.) with the actual filenames of the images you downloaded. These images are available for download from the official MI community app or from the internet.

Step 7: Verify the Installation

Once the flashing process is complete, reboot your device and verify that MIUI 9.5.19 has been installed correctly. If everything is done correctly, you should not experience the audio issue that occurred after the update to MIUI 9.6.2.0.

Step 8: Troubleshooting Tips

If you encounter any issues during the process, here are a few troubleshooting tips:

If your device does not enter fastboot mode, ensure that the USB cable is correctly connected and that the correct drivers are installed.If the device reboots back to the previous MIUI version, ensure that all the flashing images are correctly in the specified folder and have the correct file names.

Conclusion

Flashing MIUI 9.5.19 can help restore your Redmi Note 5 Pro to its previous stable state, which might resolve the audio issue you are experiencing. By following this detailed guide, you can safely and successfully downgrade your device. If you need further assistance, refer to the MI Community App or seek help from forums and guide videos available online. Happy troubleshooting!